Rolls 1554, 1555, 1538, and 1559: Eastman Double-X @ EI 400 / Eastman Double-X @ EI 640 / Orwo UN54 @ EI 100 // HC-110 1+119 semi-stand

• 1559: Ford Bridge (Intercity Bridge), Minneapolis-St Paul / Minnehaha Falls / Cats in St. Paul. (17 February 2026. Double-X as Film Photography Project X² @ EI 640 in Pentax K1000.) (on top.)
• 1538: Leadville Mineral Belt Trail / Downtown Denver. (7–8 October 2025. Double-X @ EI 400 in Canon FE-2.)
• 1555: Ice sculptures at the Minneapolis Institute of Art / St Croix Crossing, MN / abandoned building in Cottage Grove, MN / Big Rivers Regional Trail, Mendota Heights, Minnesota. (11–14 January 2026. Orwo UN54 @ EI 100 in Minolta XE-7.)
• 1554: Pavek Museum of Electronic Communication, St. Louis Park, Minnesota. (3 January 2026. Double-X @ EI 400 in Minolta XE-7.) (on bottom.)

Loaded film into 1L tank. Pre-soaked about ten minutes in tap water. Realized after loading film and pre-soaking it that I didn’t have my thermometer. Did my best to get the temperature to approximately 70°F for the stand development. Mixed 8.4mL HC-110 into ~800mL distilled water. Poured out pre-soak water, poured developer in at 11:10 a.m., and topped off with distilled water. Agitated 40x in the first minute, then 5x at 20:00, then 2x at 40:00.

After 60 minutes, disposed of developer, rinsed 5x/10x/20x in the coldest tap water I could find. Fixed in fixer 1+4 for 6 minutes, inverting 10x over 15 seconds at the top of every minute. (This is a new batch of Ilford Rapid Fixer 1+4.) Reclaimed fixer and rinsed for ten minutes in tap water, then emptied tank, added a few drops of Photo-Flo, filled tank with distilled water and agitated 20x, and hung negatives vertically to dry.