Loaded film into 1.15L tank. Pre-soaked about twenty minutes in tap water. Realized after loading film and pre-soaking it that I didn’t have my thermometer. Did my best to get the temperature to approximately 70°F for the stand development. Mixed 9.8mL HC-110 into ~1000mL distilled water. Poured out pre-soak water, poured developer in at 11:25 a.m., and topped off with distilled water. Agitated 40x in the first minute, then 5x at 20:00, then 2x at 40:00.

After 60 minutes, disposed of developer, rinsed 5x/10x/20x in the coldest tap water I could find. Fixed in fixer 1+4 for 6 minutes, inverting 10x over 15 seconds at the top of every minute. (That’s now eight rolls of film in this batch of fixer.) Reclaimed fixer and rinsed for ten minutes in tap water, then emptied tank, added a few drops of Photo-Flo, filled tank with distilled water and agitated 20x, and hung negatives vertically to dry.